Vinyl Siding in Horry County County, SC
From storm damage on a farmhouse to a full re-side in a new subdivision, one call connects you with a licensed, insured independent siding pro who covers Horry County.
- Dispatch 24/7 across the county
- Free, no-obligation call
- Written quotes before work
- Licensed & insured independent pros
A live dispatcher picks up day or night. The call is free and you will be routed to a licensed, insured independent local contractor.
Tap to Call +1-844-782-0929Siding Help That Reaches Every Corner of Horry County
Dominguez Construction Siding runs a free referral line linking Horry County property owners with independent local siding pros. We do not perform the siding work ourselves. We pick up around the clock, find out what is happening with your siding, and connect you with a licensed, insured independent pro already working in your corner of the county.
County coverage is where a referral line earns its keep. A contractor headquartered in the county seat might not travel far for a small repair, but a crew working the outlying towns could be minutes away. We match the job and the location so you are not left working through a phone list.
Properties in Horry County range widely. You will find older farmhouses with painted wood clapboard, small-town homes covered in aluminum, manufactured homes with vertical vinyl, and new construction in fiber cement or engineered lap. Barns, workshops, and outbuildings clad in metal or T1-11 panels are frequent calls as well.
Permit rules can differ between incorporated towns and unincorporated parts of the county. A good contractor will know which building office covers your address and will say early on if a permit applies.
On the call, share your address and the closest town, plus your siding type and whether water is getting inside. Rural addresses do not always map cleanly, so those details help us locate the independent contractor truly nearest to you in Horry County.
Properties out in the county often come with outbuildings, long drives, and walls facing open land, so they take more wind than tucked-in town lots. Contractors who work the area know to check fastening and wind ratings on those exposed elevations, and to plan for material delivery on gravel or soft ground.
Every Kind of Siding Job, One Phone Call
Nearly every siding call we route lands in one of six categories. Below is what each type of job really involves, what a careful contractor looks at, and what to expect before you see a price.
Emergency and Storm Damage Siding Response
When high wind strips panels off a gable end or a limb comes through an exterior wall, time matters. Exposed house wrap is only rated to sit uncovered for a limited window, and bare OSB sheathing starts drinking water the first time it rains. That is the reason storm calls move to the front of the line.
The first visit is about stopping water, not selling a remodel. A good contractor will fasten down loose courses, patch or replace torn wrap, sheet over open areas, and photograph each side of the house before work starts. Those photos matter later if you file an insurance claim.
When a limb is still resting against the house or the meter base took a hit, keep your distance and call the power company first. Siding pros can work near a service mast or meter, but they leave live electrical equipment to the utility. Once everything is safe, most contractors can tarp, sheet, and button up the wall that same day.
- Short-term weather protection over torn wrap and open sheathing
- Re-locking vinyl courses that blew loose from the panel beneath
- Hail strike mapping across vinyl, aluminum, and painted fiber cement
- Time-stamped photos ready for your insurance adjuster
Targeted Siding Repair: Cracks, Rot, Warps, and Gaps
Not every problem needs a full tear-off. A panel split by a mower stone, a melted strip beside the barbecue, or one punky clapboard below a sill is often a half-day repair. The skill is in the details: unlocking vinyl with a zip tool without kinking the courses above, sourcing a profile that actually matches, and finding out why the damage happened in the first place.
Rot is the problem that catches most owners off guard. Soft wood at the bottom of a window usually traces back to missing head flashing or a failed sill pan, not the siding itself. A contractor worth your time will probe the sheathing, check it with a moisture meter, and correct the water path before the wall gets closed.
Getting a match is the other half of any decent repair. Vinyl fades a shade or two in direct sun, so a brand-new panel from the same product line can still look off on a south wall. Seasoned repair contractors measure the reveal, profile, and butt height, carry a sample to the supplier, and if nothing matches, borrow a panel from a hidden spot behind a deck or bush.
- Single-panel swaps and partial-wall repairs
- Replacing rotted boards, trim, and sheathing
- Melted or heat-warped vinyl near grills and reflective windows
- Woodpecker damage, impact cracks, and critter entry gaps
Whole-House Siding Replacement and New Installation
Re-siding a house is a major decision, and installation quality matters more than whatever logo is on the carton. Siding warranties hinge on the manufacturer's installation instructions, which means shortcuts can cancel your coverage before the dumpster leaves.
On a correct replacement, the old siding is stripped to the sheathing so the wall can be checked. Damaged sheathing is cut out and replaced, the weather barrier is lapped shingle-fashion with taped seams, openings are flashed in sequence, and a level starter line is struck before course one. Corner posts, J-channel, and trim are set plumb so every course lines up with window heads instead of wandering.
Ask how the old siding will be removed and what happens to it. For houses built before 1978, disturbed painted wood or trim can contain lead, so contractors should use lead-safe practices like plastic containment, HEPA cleanup, and correct disposal. If the bid does not mention it and your house is that old, ask.
- Full tear-off, haul-away, and sheathing repairs
- House wrap or rainscreen installation behind new cladding
- Insulated vinyl and foam-board upgrades for better efficiency
- Profile and color guidance, from Dutch lap to board-and-batten
Siding for Commercial, Rental, and Multi-Family Buildings
Apartment buildings, retail strips, offices, and HOA communities have different needs than a single home. Work has to happen around tenants and customers, scaffolding and lifts need to be staged safely, and the finished look has to match across dozens of units. Property managers usually need a written scope, a phased schedule, and proof of liability and workers comp coverage before anyone sets up.
Callers in this category often need a contractor who can price both a single damaged building and a phased re-side of an entire complex. We connect them with independent commercial-capable pros who carry the equipment and insurance for that scale.
Commercial wall assemblies often carry extra requirements, from fire-rated sheathing on certain building types to specific fastener schedules in high-wind zones. A contractor set up for commercial work will review the plans or the current wall build-up before pricing it, instead of treating it like a home.
- HOA and multi-family phased re-siding
- Storefront and office building cladding repair
- Fire-rated and code-specific wall assemblies where needed
- Tenant-friendly scheduling and daily cleanup
Fiber Cement, Natural Wood, and Engineered Siding
Vinyl is the most common call, but plenty of homes are clad in something heavier. Fiber cement plank is dense, fire-resistant, and holds paint well, but it has to be cut with dust control because it contains crystalline silica, and it needs proper clearances above roofs and grade. Butt joints need flashing behind them, and nails go in flush, never overdriven.
Cedar and other real wood siding can last decades when boards are back-primed, nailed with stainless or hot-dipped galvanized fasteners, and hung over a drainage space. Bargain nails are behind those dark streaks on neglected wood walls. Engineered wood lap splits the difference on cost and weight, as long as cut ends are sealed and the bottom course stays clear of soil and mulch.
Steel and aluminum siding show up on modern farmhouse builds, and many older houses still wear the original aluminum. Dented aluminum can sometimes be swapped panel by panel if the profile is still available, and steel lap or board-and-batten is sold in factory finishes that hold color for a long time. In both cases, the contractor should use compatible fasteners so the metal does not corrode.
- Fiber cement lap, panel, and shake work
- Cedar clapboard, shiplap, tongue-and-groove, and shake
- Engineered wood lap and trim systems
- Aluminum and steel siding repair on older homes
Inspections, Flashing, Soffit, Fascia, and Trim Work
Siding only performs as well as the details surrounding it. Most wall leaks we hear about start at a missing kick-out flashing where a roof meets a sidewall, a cracked caulk joint at a window, or a soffit vent that lets wind-driven rain behind the panels. Those are cheap to fix early and expensive to fix late.
Many callers simply want a set of trained eyes on the house before buying it, before a storm season, or after one. A typical siding inspection looks at fastening, clearances, flashing, sealant, hidden moisture, and how much life the material has left.
A thorough inspection ends with a written summary and photos, not just a verbal opinion on the driveway. That summary is useful whether you are negotiating a home purchase, planning a budget for next year, or documenting condition before a storm season.
- Kick-out, drip cap, and Z-flashing installs
- Soffit replacement and aluminum fascia wrapping
- Pre-purchase, post-storm, and routine inspections
- Moisture meter and infrared scans behind suspect walls
How Siding Actually Fails, and What a Good Pro Checks
Years of taking siding calls in Horry County have shown us the same handful of failures again and again. None of them are mysterious once you know where to look.
Vinyl nailed too tight. Vinyl moves a lot with temperature. It is supposed to hang loosely on nails centered in the nailing slots, with a small gap left at each end for expansion. Nail it tight and the panels buckle into waves on the first hot afternoon.
Missing kick-out flashing. Where a roof edge dies into a sidewall, water runs down the step flashing and needs a small diverter to throw it into the gutter. Without it, that water goes straight behind the siding, and we have seen the sheathing under those corners turn to mush within a few seasons.
Cladding sitting too low. Siding that touches soil, mulch, or a patio wicks moisture and invites insects. Manufacturers call for a clearance above grade and above roof surfaces, and fiber cement in particular is unforgiving here.
Caulk doing a flashing's job. Caulk is a secondary seal, not a water management system. When a leak returns after each fresh bead of caulk, a missing piece of flashing is nearly always the cause.
No weather barrier, or one installed backwards. House wrap must be lapped like roof shingles, with upper pieces over lower ones, so water keeps moving down the face of the wrap. Backward laps and open tears steer water right into the sheathing, and plenty of older houses have no barrier behind the cladding at all.
Fasteners that rust or bleed. Plain steel nails rust, stain the face of wood siding, and lose holding power over time. Wood and fiber cement need hot-dipped galvanized or stainless fasteners, and coastal homes really should be on stainless.
Mildew is not always rot. Green or black streaks on shaded walls are usually surface mildew or algae that a gentle wash with a siding-safe cleaner will remove. Rot is another story, because the material feels soft, sounds dull, or crumbles under a probe. A contractor can tell them apart quickly, which can save you from paying for an unnecessary repair.
A word on timing. Planned siding projects pile up in spring and fall, while storm season brings sudden waves of emergency calls. If your project can wait, booking an estimate a few weeks ahead of those rushes usually gets you more scheduling options.
Should You Repair or Replace Your Siding?
Horry County homeowners ask this more than anything else, and the real answer depends on how much of the wall is involved and what caused the damage.
Signs a repair is probably enough
The damage stays on one elevation or a handful of panels, the remaining siding is solid and well fastened, the sheathing is dry, and a decent match can be found. Wind blow-offs, impact cracks, heat warping, and localized rot from one missing flashing typically land in this group.
Signs replacement is the smarter move
Multiple walls are cracked, faded, or brittle, panels keep releasing because the original job was poor, soft sheathing appears in several places, or the material is too old to match. Repairing a failing wall again and again often costs more over a few years than replacing it once and doing it right.
What drives the price of a siding job
Every estimate is built on a handful of variables. Material is the obvious one: vinyl generally costs the least, engineered wood and fiber cement sit in the middle, and natural wood and premium metal run higher. After that comes the size and height of the walls, how many windows and corners need trim, whether old siding has to be removed and hauled off, and how much sheathing needs replacing once the wall is open.
Access matters too. A tall wall above a slope needs scaffolding or a lift, and that labor is built into the price. Hidden rot is the unknown, so a careful contractor will tell you up front how surprise sheathing repairs will be billed.
From Your Call to a Finished Wall in Four Steps
The process stays simple, because chasing down contractors is the last thing anyone wants. A single call gets your job in front of an independent local pro who works on siding in Horry County.
Call Our Dispatch Desk
Tell the dispatcher what you are seeing: missing panels, a soft spot, a leak inside, or a full re-side you are planning. Photos help if you can take them. Calls are picked up around the clock.
Get Connected to an Independent Local Pro
We route your call to an independent, licensed and insured siding contractor who works your area and handles your type of job. Emergency calls are flagged for the fastest available response.
On-Site Assessment and Written Quote
The contractor inspects the wall, checks for moisture behind the siding, and explains what failed and why. You get a written quote before any work begins, so there are no surprises.
Repair, Cleanup, and Walkthrough
After you sign off, the job is completed to manufacturer specs, the mess is cleared, and you walk the result with the contractor. Ask for the warranty paperwork and before-and-after photos to keep on file.
Why Horry County homeowners Call Our Siding Line First
Finding a siding contractor on your own usually means leaving voicemails, waiting days for callbacks, and comparing bids that do not describe the same job. We take that legwork off your plate.
Independent Pros Who Carry Licensing and Insurance
We route calls to independent local contractors who represent that they hold the licensing and coverage required where you live. Always ask to see the certificate before work starts; any reputable pro will show it.
Upfront, Written Pricing
Contractors in our network put the price in writing after inspecting the wall, never as a blind phone guess. You see the scope, materials, and full cost before a single panel comes off.
Quick Response From Local Pros
Because calls are matched to contractors who already work around Horry County, travel time stays short. Storm and active-leak calls are prioritized day or night.
Free to Call, No Obligation
Calling the line costs nothing, and you are never obligated to hire anyone. If the estimate does not feel right, you are free to pass.
Every caller gets the same treatment, whether the job is one cracked panel or an entire building. Small repairs are often the hardest to get scheduled on your own, and they are a big part of what we route every day.
We keep things practical, too. If what you describe sounds like a gutter, roof, or window problem rather than a siding one, the dispatcher will say so instead of booking a wasted siding visit.
One honest note: we are a referral service, not the contractor. The pros we connect you with are independent businesses, so take a minute to confirm their license, insurance, and permits for your job.
Signs your siding needs a professional look
- Wavy or bowed panels, or bottom edges lifting off the wall
- Cracks, holes, or chips that expose the wrap or sheathing behind
- Soft or crumbling areas around windows, doors, or the foundation line
- Peeling interior paint or water stains on the inside of an exterior wall
- Mold, mildew, or green growth that returns quickly after cleaning
- Rust streaks below nail heads or dark staining on wood siding
- Gaps at corners, J-channel, or trim where daylight or insects get in
- Heating and cooling bills creeping up with no other explanation
Any one of these on its own may be minor. Two or three together, especially near windows or rooflines, usually mean water is getting where it should not. That is the right time to have an independent pro take a closer look, before a small repair turns into a wall rebuild.
Common siding materials at a glance
Vinyl
Popular for its affordable price and easy maintenance. Thicker panels resist wind and impact better, and insulated vinyl adds a foam backer for stiffness and comfort. It must be hung loose to move with temperature.
Fiber Cement Plank
Heavy, fire-resistant, insect-proof, and great at holding paint. It needs dust-controlled cutting, flashing at butt joints, and strict clearances above grade and roofs.
Cedar and Real Wood
Classic looks and a long life when maintained. Boards should be back-primed, nailed with stainless or galvanized fasteners, and refinished on a regular cycle.
Engineered Wood Lap
Lighter than fiber cement, with wood texture at a mid-range price. Sealed cut ends and good clearance from dirt, mulch, and puddles are a must.
What Horry County Property Owners Said After Their Siding Jobs
Shared with permission and trimmed for length, these notes come from callers spread across Horry County.
Being out in the country, I assumed no one would bother coming for a handful of panels. The contractor I got lives close by, showed up the following day, and swapped out all the hail-split vinyl on our north side.
Earl W.Horry County hail damage repairOur farmhouse clapboard was long overdue for attention. The pro replaced the rotted boards, back-primed each new one, and used stainless fasteners to stop staining. They spotted a missing kick-out flashing above the porch roof too.
Linda S.Horry County wood siding repairHigh wind pulled a T1-11 panel off my workshop. I called at dawn and had help there before noon to cover it, and they returned with new panels painted to match.
Brandon K.Horry County outbuilding sidingWe bought a house in a new subdivision and the fiber cement was already cracking at the corners. The contractor showed us the nails were overdriven and the gaps at the trim were wrong, then gave us a written report for the builder.
Priya and Sam N.Horry County fiber cement inspectionOur church fellowship hall had vinyl peeling off the gable after a windstorm. The contractor worked around our events, used a lift for the high section, and finished in two days.
Pastor Jim D.Horry County commercial siding repairLittle town, little job, fast response. Two panels got dented by a ladder, and the contractor got an exact color match by taking a panel from behind the AC condenser.
Rosa M.Horry County vinyl repairCommon Vinyl Siding Questions in Horry County
How fast can a Vinyl Siding technician arrive in Horry County?
Response time depends on where you are in the county and how busy contractors are after a storm. Emergencies are prioritized, and many get a contractor that day or the next morning. Planned-work estimates are usually booked within a few days.
Do contractors travel to rural parts of Horry County?
Yes. That is one of the main reasons people call us. We find independent contractors already working close to your property, which keeps rural homes from being skipped. A few may add a travel fee for very remote sites, and they should mention it before the visit.
Do you provide upfront pricing?
The independent contractors you are connected with provide written quotes after inspecting the siding. That way the price reflects the real damage, not a guess. No work should begin until you sign off on the estimate.
What emergency services are available?
Emergency help includes covering exposed walls after wind or hail, securing loose panels, handling tree and vehicle impact damage, and stopping water that is reaching the interior. Lasting repairs come after materials are matched.
Can you help with barns, shops, and outbuildings?
Yes. Many county calls involve metal, T1-11, board-and-batten, or vinyl on outbuildings. We send those to independent pros who handle farm and accessory buildings in addition to houses.
Is the call really free?
Yes. There is no fee to call and no obligation to hire. Dominguez Construction Siding is a referral service, so the contractor provides your quote directly.
Do I need a permit for siding in Horry County?
That depends on whether your property is in a town or unincorporated area, and how big the project is. Whole-house replacements are more likely to require one. Your contractor should confirm and take care of it.
Will insurance cover storm damage to my siding?
Wind and hail damage is frequently covered, though every policy is different. Call your insurer first, then have the contractor document the damage with photos and a written description. Good documentation makes the claim go smoother.
What should I ask a contractor before hiring them?
Ask for a current insurance certificate, any license your town or county requires, a written scope that mentions flashing and house wrap, and who will handle permits. Confirm too that they follow the manufacturer's instructions so the warranty stays valid.
How long does a siding repair usually take?
Minor repairs usually take a few hours after matching material arrives. Larger sections with sheathing replacement may take a day or two, and full replacements can take a week or more. Weather and supply can shift the timing.
Where We Route Siding Calls in Horry County
Coverage includes commercial buildings, rental homes, churches, schools, and HOA communities in Horry County. Managers and out-of-area owners are welcome to call for the property.
The line covers every town, village, and unincorporated area in Horry County. From the county seat to small rural communities and large acreage properties, the dispatcher will find an independent pro close to you.
The cities and zip codes below are all inside the coverage area. If your town is not listed, call anyway, because coverage often reaches beyond the list.
- The county seat and nearby neighborhoods
- Villages and small towns
- Unincorporated and rural properties
- New subdivisions and HOA communities
- Farm buildings and shops
- Multi-family and commercial buildings
Siding Damage Anywhere in Horry County? Call Now
Call day or night. It costs nothing and connects you with a licensed, insured independent pro close to your property.
Call +1-844-782-0929 Now