Wood Siding in Santa Fe, NM
Cedar clapboard, shiplap, board-and-batten, or shingles that are rotting, splitting, cupping, or shedding paint? One call connects you with a licensed, insured independent wood siding pro in Santa Fe who repairs it the traditional way and finishes it to last.
- Phones answered 24/7
- Free to call, no obligation
- Written quotes first
- Licensed & insured independent pros
Talk to a dispatcher now. Free call, no obligation, routed to an independent wood siding pro.
Tap to Call +1-844-782-0929Wood Siding Rewards Good Carpentry and Punishes Shortcuts
Cedar, redwood, and pine siding can last a very long time. The homes still wearing original clapboard prove it. What shortens its life is almost always moisture: water trapped behind boards, end grain left unsealed, paint failing from the back side, or boards touching soil.
That is why the details matter. Good wood siding work starts with back-priming every board on all six sides, sealing every cut end, and fastening with stainless steel or hot-dipped galvanized nails. Uncoated steel reacts with cedar tannins and leaves dark streaks down the siding.
Many pros now install wood over a rainscreen, a small gap created with furring strips or a drainage mat, so the back of each board can dry. That single step greatly extends paint life and cuts down on cupping.
Older painted wood may contain lead. Contractors working on houses built before 1978 should use lead-safe practices when scraping, sanding, or removing boards.
Why Choose Our Specialized Wood Siding in Santa Fe, NM
The independent pros we connect for wood siding in Santa Fe bring real carpentry experience.
Licensed & Insured Pros
Calls go to independent contractors who represent that they carry the licensing and insurance Santa Fe requires.
Fast Local Dispatch
Your call goes to a wood siding pro already working close to Santa Fe.
Upfront, Written Pricing
Quotes specify wood species, profile, grade, primer and finish, fasteners, and any rot repair allowance.
Carpentry Tools & Materials
Wood pros carry moisture meters, oscillating tools, nailers loaded with stainless nails, and stain-blocking primers.
Dominguez Construction Siding is a free referral service, not the contractor. The pros we connect you with are independent businesses, so confirm their license, insurance, and permits before work begins.
What Wood Siding Pros Handle in Santa Fe
The wood siding work we route most in Santa Fe:
Wood Rot Repair
Rotted boards are removed at staggered seams, the moisture source is fixed, and new primed boards go in.
Clapboard Repair and Installation
Clapboard is matched by width, exposure, and butt thickness, and installed with proper laps and stainless fasteners.
Vertical and Shiplap Wood Siding
Vertical and shiplap profiles need solid blocking or furring and careful attention to how water sheds at the bottom.
Wood Shingle Siding
Individual shingles are replaced, coursed, and nailed to preserve the pattern and keep keyways offset.
Wood Siding Refinishing
Loose paint is removed, bare wood gets stain-blocking primer, and a durable finish goes on.
Semi-Transparent and Solid Stains
Cedar can be stained to show the grain or given a solid stain for more protection, with reapplication on a schedule.
How a Pro Diagnoses Failing Wood Siding
Wood siding gives clear clues to anyone who knows them. Paint lifting off in big sheets to bare wood generally means moisture is pushing from behind, from the interior or from trapped water. Paint failing only at the bottom edges usually means boards were never back-primed or end-sealed.
Cupping, where boards curl at the edges, comes from uneven moisture between the front and back of the board. Splits at nails usually mean the wrong fastener or nails set too near the edge. Dark streaks below nail heads mean the fasteners are reacting with the wood.
Rot usually starts at end grain, the lowest course, beneath windows, and at trim joints. The pro probes those spots, reads moisture levels, and checks for missing head flashing, failed caulk, and gutters dumping onto the wall. From there you get a plan: replace a few boards, correct the water source, and refinish, or address a larger section.
Wood siding calls we route most
- Rotted clapboard near the ground and windows
- Peeling paint on older wood homes
- Cupped or split cedar boards
- Black streaks from rusting nails
- Restaining and resealing cedar
Four Steps to Restored Wood Siding
Call Dispatch
Share the wood type and profile, what you are seeing, and whether you also want paint or stain.
Rapid Mobile Arrival
An independent wood siding pro near Santa Fe visits to probe for rot, check moisture, and measure board profiles.
Expert Assessment & Quote
A written quote lists species, profile, fasteners, primer, finish, and a rot allowance.
Repair & Walkthrough
Boards are replaced or installed, primed, and finished, the site is cleaned, and you walk the work together.
What Santa Fe Callers Said About Their Wood Siding
A few follow-up comments from callers around Santa Fe, used with permission and edited for length.
Our 1920s house has original clapboard. The carpenter matched the profile exactly, back-primed every board, and you cannot tell which ones are new after painting.
Eleanor P.Historic clapboard repair, Santa FePaint kept peeling off our cedar every two years. The pro found the bathroom fan venting into the wall and no rainscreen. Fixed both, and the new paint is holding.
Robert G.Wood siding refinishing, Santa FeBlack streaks ran down our cedar from every nail. The pro explained the old nails were reacting with the wood, replaced the worst boards with stainless fasteners, and cleaned the rest.
Tanya B.Cedar siding repair, Santa FeThe bottom two courses on the north side were soft. Replaced, sealed on every end, and the grade was lowered so the boards are clear of the dirt now.
Henry C.Rot repair, Santa FeWe had our cedar shingles restained. The pro replaced a dozen split shingles first and kept the pattern perfect.
Lauren M.Cedar shingle restain, Santa FeWood Siding Questions in Santa Fe
Can rotted wood siding be repaired instead of replaced?
Yes. Individual boards can usually be cut out and replaced at staggered joints. Minor rot in trim can occasionally be consolidated and filled. What matters most is fixing the source of the water.
How often does wood siding need painting or staining?
It depends on sun exposure, finish type, and climate. Paint and solid stains generally outlast semi-transparent stains, and sunny walls need refinishing sooner.
Why is the paint peeling off my wood siding?
Typical culprits are moisture from behind, boards never back-primed, poor prep, or the wrong paint. A pro can identify the cause so the new finish lasts.
What nails should be used on cedar siding?
Stainless nails are ideal for cedar, with hot-dipped galvanized as the usual alternative. Plain steel reacts with cedar tannins and causes black streaks.
Can new wood siding match my old siding?
Most of the time, by matching width, reveal, thickness, and profile. Some older profiles may need custom milling. Paint helps new and old boards blend.
Is wood siding a good choice for a new installation?
It can be, if you are prepared for periodic refinishing. Installed over a rainscreen with proper priming and fasteners, wood siding performs well and offers a look other materials imitate.
Where We Route Wood Siding Calls
Wood siding calls come from historic areas, older neighborhoods, farmhouses, and custom homes all over Santa Fe.
Historic home owners can call about matching old profiles, custom milling, and lead-safe paint work on original wood siding.
See the zip codes and nearby cities listed below.
Our phones are staffed at all hours, weekends and holidays included, and every call goes to an independent contractor already working in or close to Santa Fe. Keeping it local cuts drive time and puts a pro on your job who knows the area's weather, housing styles, and permit process. If you are just outside the city limits, call anyway, because coverage often reaches neighboring towns and unincorporated areas. There is never a charge to call, and you are never obligated to hire anyone.
Ready to Restore Your Wood Siding?
Call now for a free, no-obligation connection to a licensed, insured independent wood siding pro in Santa Fe.
Call +1-844-782-0929 Now