Wood Siding in Mission, TX
Real wood siding needs a carpenter's touch. A single call puts you in touch with a licensed and insured independent wood siding specialist in Mission for board replacement, rot repair, new installation, and refinishing.
- Live dispatch 24/7
- Free, no-obligation call
- Written quotes first
- Licensed & insured independent pros
A live dispatcher picks up day or night. Free call, connected to an independent local wood siding specialist.
Tap to Call +1-844-782-0929Why Wood Siding Needs a Carpenter, Not Just an Installer
Cedar, redwood, and pine siding can last a very long time. Houses still wearing their original clapboard are the proof. What cuts it short is nearly always moisture, from water trapped behind boards to raw end grain, paint pushed off from behind, and boards in contact with soil.
So the details are everything. Quality wood work begins with priming every board on all faces, sealing each cut end, and using stainless or hot-dipped galvanized nails. Uncoated steel reacts with cedar tannins and leaves dark streaks down the siding.
Many pros now install wood over a rainscreen, a small gap created with furring strips or a drainage mat, so the back of each board can dry. That one detail dramatically improves paint life and reduces cupping.
On older homes, painted wood may contain lead. Contractors working on houses built before 1978 should use lead-safe practices when scraping, sanding, or removing boards.
Why Choose Our Specialized Wood Siding in Mission, TX
Wood siding needs carpentry skill and patience, and those are the pros we route Mission wood siding calls to.
Licensed & Insured Pros
Calls go to independent contractors who represent that they carry the licensing and insurance Mission requires.
Fast Local Dispatch
Your call goes to a wood siding pro already working close to Mission.
Upfront, Written Pricing
Quotes specify wood species, profile, grade, primer and finish, fasteners, and any rot repair allowance.
Carpentry Tools & Materials
Moisture meters, oscillating multi-tools for clean board removal, finish nailers with stainless fasteners, and stain-blocking primers.
To be clear, Dominguez Construction Siding is a free referral service and not the contractor. Every pro you are connected with runs an independent business, so verify their license, insurance, and permits before the job starts.
Wood Siding Services in Mission
The wood siding work we route most in Mission:
Rotted Board Replacement
Rotted boards are removed at staggered seams, the moisture source is fixed, and new primed boards go in.
Clapboard Repair and Installation
Clapboard is matched by width, exposure, and butt thickness, and installed with proper laps and stainless fasteners.
Vertical and Shiplap Wood Siding
Vertical and shiplap profiles need solid blocking or furring and careful attention to how water sheds at the bottom.
Cedar Shingles and Shakes
Damaged shingles are replaced and nailed in pattern with offset keyways.
Wood Siding Refinishing
Failing paint is scraped and sanded, bare wood is primed with a stain-blocking primer, and a quality finish is applied.
Staining and Sealing
Cedar can be stained to show the grain or given a solid stain for more protection, with reapplication on a schedule.
How a Pro Diagnoses Failing Wood Siding
Wood siding gives clear clues to anyone who knows them. Paint peeling down to bare wood in large sheets usually means moisture is pushing out from behind, either from inside the house or from water trapped behind the boards. Paint failing only along the bottom edges points to boards that were never back-primed or sealed.
Cupping, with edges curling up, comes from moisture differences between the face and back of a board. Splits at nails usually mean the wrong fastener or nails set too near the edge. Black streaks under nails mean the fasteners are reacting with tannins in the wood.
Rot usually starts at end grain, the lowest course, beneath windows, and at trim joints. The pro probes those spots, reads moisture levels, and checks for missing head flashing, failed caulk, and gutters dumping onto the wall. From there you get a plan: replace a few boards, correct the water source, and refinish, or address a larger section.
Typical wood siding requests
- Rotted clapboard near the ground and windows
- Paint failure on older houses
- Cupping and splitting boards
- Fastener staining on cedar
- Restaining and resealing cedar
Four Steps to Restored Wood Siding
Call Dispatch
Share the wood type and profile, what you are seeing, and whether you also want paint or stain.
Rapid Mobile Arrival
An independent wood siding pro near Mission visits to probe for rot, check moisture, and measure board profiles.
Expert Assessment & Quote
You get a written quote listing species, profile, fasteners, primer, finish, and a rot repair allowance.
Repair & Walkthrough
The wood is replaced or installed, primed, and finished, cleanup is done, and you review it together.
Mission Wood Siding Projects
Follow-up notes from Mission callers, shared with permission and trimmed for length.
Our 1920s house has original clapboard. The carpenter matched the profile exactly, back-primed every board, and you cannot tell which ones are new after painting.
Eleanor P.Historic clapboard repair, MissionPaint kept peeling off our cedar every two years. The pro found the bathroom fan venting into the wall and no rainscreen. Fixed both, and the new paint is holding.
Robert G.Wood siding refinishing, MissionWe had dark streaks under every nail in our cedar. The carpenter explained the nails were reacting with the tannins, swapped the worst boards using stainless, and cleaned the rest.
Tanya B.Cedar siding repair, MissionThe lowest boards on our north wall were rotten. They were replaced and end-sealed, and the soil was pulled back so the siding no longer touches it.
Henry C.Rot repair, MissionWe had our cedar shingles restained. The pro replaced a dozen split shingles first and kept the pattern perfect.
Lauren M.Cedar shingle restain, MissionCommon Questions About Wood Siding
Can rotted wood siding be repaired instead of replaced?
Yes. Individual boards can usually be cut out and replaced at staggered joints. Minor rot in trim can occasionally be consolidated and filled. What matters most is fixing the source of the water.
How often does wood siding need painting or staining?
It depends on sun exposure, finish type, and climate. Solid stains and paint usually last longer than semi-transparent stains, and sunny walls need attention sooner.
Why is the paint peeling off my wood siding?
Common causes include moisture pushing from behind, boards that were not back-primed, poor surface prep, or incompatible paint. A pro can identify the cause so the new finish lasts.
What nails should be used on cedar siding?
Stainless nails are ideal for cedar, with hot-dipped galvanized as the usual alternative. Uncoated steel reacts with cedar and leaves dark stains.
Can new wood siding match my old siding?
Usually, by matching board width, exposure, thickness, and profile. Some older profiles may need custom milling. Painting blends new and old boards together.
Is wood siding a good choice for a new installation?
It can be a great choice if you are fine with periodic refinishing. With a rainscreen, good priming, and the right nails, wood performs well and has a look other materials try to copy.
Wood Siding Help Across Mission
Wood siding calls come from historic areas, older neighborhoods, farmhouses, and custom homes all over Mission.
Historic home owners can call about matching old profiles, custom milling, and lead-safe paint work on original wood siding.
The zip codes and nearby cities below show the coverage area.
Our phones are staffed at all hours, weekends and holidays included, and every call goes to an independent contractor already working in or close to Mission. Keeping it local cuts drive time and puts a pro on your job who knows the area's weather, housing styles, and permit process. If you live just past the city line, go ahead and call, since coverage usually extends into nearby towns and unincorporated land. Calling is always free, and there is no obligation to hire.
Talk to a Mission Wood Siding Pro
A free call connects you with a licensed and insured independent wood siding specialist serving Mission.
Call +1-844-782-0929 Now