Siding in Horry County County, SC
From storm damage on a farmhouse to a full re-side in a new subdivision, one call connects you with a licensed, insured independent siding pro who covers Horry County.
- 24/7 county-wide dispatch
- Free to call, no obligation
- Written quotes before work
- Licensed & insured independent pros
A live dispatcher picks up day or night. The call is free and you will be routed to a licensed, insured independent local contractor.
Tap to Call +1-844-782-0929One Siding Line for Every Town in Horry County
Dominguez Construction Siding runs a free referral line linking Horry County property owners with independent local siding pros. We do not perform the siding work ourselves. We answer the phone 24/7, learn what is going on with your walls, and route you to a licensed and insured independent pro who already works in your part of the county.
Covering a whole county is where a referral line really pays off. A contractor based in the county seat may not drive forty minutes for a small repair, while a crew working the outer townships might be ten minutes from your door. We match the job and the location so you are not left working through a phone list.
The housing stock in Horry County varies a lot. There are older farmhouses with painted clapboard, small-town houses wearing aluminum, manufactured homes in vertical vinyl, and new builds in fiber cement or engineered lap. Barns, workshops, and outbuildings clad in metal or T1-11 panels are frequent calls as well.
Permit requirements can vary between incorporated towns and unincorporated areas. A good contractor will know which building office covers your address and will say early on if a permit applies.
When you call, tell the dispatcher the nearest town or crossroads along with your address, the siding material, and whether water is getting in. Rural addresses can be tricky to map, and those details help us find the independent pro who is actually closest to you in Horry County.
County properties also tend to have more outbuildings, longer driveways, and walls that face open fields, which means more wind exposure than a sheltered city lot. Local contractors know to check nailing and wind ratings on exposed walls and to plan deliveries around gravel drives and soft ground.
Siding Work the Pros in Our Network Handle Every Day
Most calls we take fall into one of six buckets. Below is what each type of job really involves, what a careful contractor looks at, and what to expect before you see a price.
Emergency and Storm Damage Siding Response
When a wind event peels a run of vinyl off the gable or a falling limb punches through a wall, the clock starts. Exposed house wrap is only rated to sit uncovered for a limited window, and bare OSB sheathing starts drinking water the first time it rains. That is the reason storm calls move to the front of the line.
A first emergency visit is about keeping water out, not pitching a whole new exterior. A good contractor will fasten down loose courses, patch or replace torn wrap, sheet over open areas, and photograph each side of the house before work starts. Those pictures become important if an insurance claim follows.
If a tree is still leaning on the wall or the electric meter area is damaged, stay clear and call the utility first. Siding pros can work near a service mast or meter, but they leave live electrical equipment to the utility. Once everything is safe, most contractors can tarp, sheet, and button up the wall that same day.
- Short-term weather protection over torn wrap and open sheathing
- Re-locking vinyl courses that blew loose from the panel beneath
- Hail impact mapping on vinyl, aluminum, and painted fiber cement
- Dated photo documentation you can hand to your adjuster
Siding Repair for Cracks, Rot, Warping, and Loose Panels
Not every problem needs a full tear-off. A cracked vinyl panel from a stray baseball, a warped section next to the grill, or a single soft clapboard under a window can usually be fixed in a few hours. The craft is in the details, like popping vinyl free with a zip tool without creasing the rows above, tracking down a matching profile, and figuring out what caused the damage.
Rot is the one that fools people. Soft wood at the bottom of a window usually traces back to missing head flashing or a failed sill pan, not the siding itself. A contractor worth your time will probe the sheathing, check it with a moisture meter, and correct the water path before the wall gets closed.
Matching is the other half of a good repair. Vinyl fades a shade or two in direct sun, so a brand-new panel from the same product line can still look off on a south wall. Experienced repair pros measure the exposure, profile, and butt height, bring a cut sample to the supply house, and when nothing matches, pull a panel from behind a shrub or deck where a slight mismatch will not show.
- Single-panel swaps and partial-wall repairs
- Rotted clapboard, trim, and sheathing replacement
- Heat-distorted vinyl near grills and low-E window glare
- Woodpecker damage, impact cracks, and critter entry gaps
Whole-House Siding Replacement and New Installation
Re-siding a house is a major decision, and installation quality matters more than whatever logo is on the carton. Manufacturers tie their warranties to their published installation instructions, so a crew that skips steps can void coverage on day one.
On a correct replacement, the old siding is stripped to the sheathing so the wall can be checked. Damaged sheathing is cut out and replaced, the weather barrier is lapped shingle-fashion with taped seams, openings are flashed in sequence, and a level starter line is struck before course one. Corners, J-channel, and trim are set plumb, so courses line up with window heads instead of drifting.
Ask how the old siding will be removed and what happens to it. For houses built before 1978, disturbed painted wood or trim can contain lead, so contractors should use lead-safe practices like plastic containment, HEPA cleanup, and correct disposal. If the bid does not mention it and your house is that old, ask.
- Tear-off, disposal, and sheathing repair
- New weather barrier or rainscreen behind the cladding
- Insulated vinyl and rigid foam upgrades for energy savings
- Color and profile selection help, from Dutch lap to board-and-batten
Commercial and Multi-Unit Siding Projects
Rental properties, storefronts, small offices, and HOA communities run on different rules than a single-family house. Work has to happen around tenants and customers, scaffolding and lifts need to be staged safely, and the finished look has to match across dozens of units. Property managers usually need a written scope, a phased schedule, and proof of liability and workers comp coverage before anyone sets up.
Callers in this category often need a contractor who can price both a single damaged building and a phased re-side of an entire complex. We route those calls to independent contractors who have the equipment and coverage for that size of job.
Commercial wall assemblies often carry extra requirements, from fire-rated sheathing on certain building types to specific fastener schedules in high-wind zones. A contractor set up for commercial work will review the plans or the current wall build-up before pricing it, instead of treating it like a home.
- Phased re-siding for HOAs and apartment communities
- Storefront and office building cladding repair
- Fire-rated and code-specific wall assemblies where needed
- Occupant-friendly scheduling and end-of-day cleanup
Fiber Cement, Natural Wood, and Engineered Siding
Vinyl may be the most common request, yet many homes wear heavier materials. Fiber cement plank is dense, fire-resistant, and holds paint well, but it has to be cut with dust control because it contains crystalline silica, and it needs proper clearances above roofs and grade. Each butt joint gets a flashing strip behind it, and nails are set flush rather than sunk.
Cedar and other real wood siding can last decades when boards are back-primed, nailed with stainless or hot-dipped galvanized fasteners, and hung over a drainage space. Bargain nails are behind those dark streaks on neglected wood walls. Engineered wood lap lands in the middle on weight and price, provided cut ends are sealed and the bottom row stays clear of mulch and dirt.
Metal siding is coming back on modern farmhouse and contemporary designs, and older homes still carry plenty of original aluminum. Dented aluminum can often be replaced one piece at a time when the profile is still made, and steel lap or board-and-batten comes in baked finishes that resist fading. Either way, the pro should use fasteners compatible with the metal to avoid corrosion.
- Fiber cement lap, panel, and shingle installation and repair
- Cedar clapboard, shiplap, tongue-and-groove, and shake
- Engineered wood lap siding and matching trim
- Aluminum and steel siding repair for older houses
Inspections, Flashing, Soffit, Fascia, and Trim Work
The cladding is only as good as the details around it. Most wall leaks we hear about begin at a missing kick-out flashing at a roof-to-wall joint, a split caulk line at a window, or a soffit that lets driven rain behind the cladding. They cost little to fix early and plenty to fix late.
Plenty of callers just want a trained set of eyes on the house before closing on it, ahead of storm season, or after a big blow. A typical siding inspection looks at fastening, clearances, flashing, sealant, hidden moisture, and how much life the material has left.
A thorough inspection ends with a written summary and photos, not just a verbal opinion on the driveway. That write-up helps whether you are negotiating a purchase, budgeting for next year, or recording condition ahead of storm season.
- Kick-out, drip cap, and Z-flashing installs
- Vented and solid soffit replacement and fascia wraps
- Pre-purchase, post-storm, and routine inspections
- Moisture meter and thermal camera checks on suspect walls
Why Siding Fails and What the Right Contractor Looks For
After years of routing siding calls in Horry County, the same few failures come up over and over. None of them are mysterious once you know where to look.
Vinyl that was nailed down hard. Vinyl expands and contracts a surprising amount with heat and cold. It is supposed to hang loosely on nails centered in the nailing slots, with a small gap left at each end for expansion. Pin it tight and you get rippled, wavy panels the first warm afternoon.
Missing kick-out flashing. At the spot where a roof edge meets a wall, water follows the step flashing and needs a little diverter to push it into the gutter. Without it, that water goes straight behind the siding, and we have seen the sheathing under those corners turn to mush within a few seasons.
Too close to the ground. Siding that touches soil, mulch, or a patio wicks moisture and invites insects. Manufacturers spell out clearances above grade and roof lines, and fiber cement is especially strict about them.
Caulk doing a flashing's job. Caulk is a secondary seal, not a water management system. When a leak returns after each fresh bead of caulk, a missing piece of flashing is nearly always the cause.
No weather barrier, or one installed backwards. House wrap has to be lapped like shingles, upper sheets over lower ones, so water running down the wall stays on the outside. Backward laps and open tears steer water right into the sheathing, and plenty of older houses have no barrier behind the cladding at all.
Fasteners that rust or bleed. Plain steel nails rust, stain the face of wood siding, and lose holding power over time. Wood and fiber cement call for hot-dipped galvanized or stainless nails, and homes near salt water belong on stainless.
Green streaks do not always mean rot. Green or black streaks on shaded walls are usually surface mildew or algae that a gentle wash with a siding-safe cleaner will remove. Rot is different: the material feels soft, sounds hollow, or crumbles when probed. A pro can tell the two apart in minutes, which can save you from paying for a repair you do not need.
A word on timing. Planned siding projects pile up in spring and fall, while storm season brings sudden waves of emergency calls. If your project can wait, booking an estimate a few weeks ahead of those rushes usually gets you more scheduling options.
Should You Repair or Replace Your Siding?
Horry County homeowners ask this more than anything else, and the real answer depends on how much of the wall is involved and what caused the damage.
Signs a repair is probably enough
The damage stays on one elevation or a handful of panels, the remaining siding is solid and well fastened, the sheathing is dry, and a decent match can be found. Storm blow-offs, impact cracks, grill melt, and isolated rot from a single missing flashing usually fall here.
Signs replacement is the smarter move
Multiple walls are cracked, faded, or brittle, panels keep releasing because the original job was poor, soft sheathing appears in several places, or the material is too old to match. Repairing a failing wall again and again often costs more over a few years than replacing it once and doing it right.
What affects what you will pay
Every estimate is built on a handful of variables. Material is the obvious one: vinyl generally costs the least, engineered wood and fiber cement sit in the middle, and natural wood and premium metal run higher. After that comes the size and height of the walls, how many windows and corners need trim, whether old siding has to be removed and hauled off, and how much sheathing needs replacing once the wall is open.
Access matters too. A tall wall above a slope needs scaffolding or a lift, and that labor is built into the price. Hidden rot is the unknown, so a careful contractor will tell you up front how surprise sheathing repairs will be billed.
Four Steps From Phone Call to Finished Siding
The process stays simple, because chasing down contractors is the last thing anyone wants. One call puts your job in front of an independent local pro who handles siding in Horry County.
Call the Dispatch Line
Tell the dispatcher what you are seeing: missing panels, a soft spot, a leak inside, or a full re-side you are planning. Photos help if you have them. Lines are answered 24/7.
Get Matched With a Local Pro
We route your call to an independent, licensed and insured siding contractor who works your area and handles your type of job. Emergencies are flagged for the quickest response available.
Inspection and a Written Estimate
The contractor inspects the wall, checks for moisture behind the siding, and explains what failed and why. You get a written quote before any work begins, so there are no surprises.
Repair, Cleanup, and Walkthrough
After you sign off, the job is completed to manufacturer specs, the mess is cleared, and you walk the result with the contractor. Ask for the warranty paperwork and before-and-after photos to keep on file.
Why Horry County homeowners Call Our Siding Line First
Hunting for a siding contractor alone usually means voicemails, slow callbacks, and bids that do not even cover the same scope. We handle that legwork for you.
Licensed and Insured Independent Pros
We route calls to independent local contractors who represent that they hold the licensing and coverage required where you live. Ask for the insurance certificate before work begins; reputable contractors hand it over without fuss.
Clear Written Quotes Before Work
The pros in our network quote in writing after they see the wall, not over the phone sight unseen. You know the scope, materials, and total before anyone pulls a panel.
Quick Response From Local Pros
Because calls are matched to contractors who already work around Horry County, travel time stays short. Storm and active-leak calls are prioritized day or night.
Free, No-Obligation Referral
Calling the line costs nothing, and you are never obligated to hire anyone. If the estimate does not feel right, you are free to pass.
Every caller gets the same treatment, whether the job is one cracked panel or an entire building. Small repairs are often the hardest to get scheduled on your own, and they are a big part of what we route every day.
We also keep the conversation practical. If what you describe sounds like a gutter, roof, or window problem rather than a siding one, the dispatcher will say so instead of booking a wasted siding visit.
To be straight with you, we are a referral service and not the contractor. The pros we connect you with are independent businesses, so take a minute to confirm their license, insurance, and permits for your job.
Signs your siding needs a professional look
- Wavy or bowed panels, or bottom edges lifting off the wall
- Cracks, holes, or chips that expose the wrap or sheathing behind
- Soft, spongy, or crumbling spots near windows, doors, or the foundation
- Bubbling paint or water marks on the inside face of an outside wall
- Mold, mildew, or green growth that returns quickly after cleaning
- Rust runs under nails or dark streaks on wood boards
- Open gaps at corners, channels, or trim where light or bugs get through
- Energy bills climbing for no obvious reason
Any single item on this list could be small. Two or three at once, particularly around windows or roof edges, usually point to water getting behind the wall. That is the right time to have an independent pro take a closer look, before a small repair turns into a wall rebuild.
Common siding materials at a glance
Vinyl
The most common choice for its low cost and minimal upkeep. Thicker panels resist wind and impact better, and insulated vinyl adds a foam backer for stiffness and comfort. It must be hung loose to move with temperature.
Fiber Cement
Heavy, fire-resistant, insect-proof, and great at holding paint. It needs dust-controlled cutting, flashing at butt joints, and strict clearances above grade and roofs.
Cedar and Real Wood
A timeless look and long service life with regular care. Boards should be back-primed, fastened with stainless or galvanized nails, and repainted or restained on schedule.
Engineered Wood
Lighter than fiber cement with a wood-grain look and moderate cost. Cut edges must be sealed and the bottom course kept clear of soil, mulch, and standing water.
What Horry County Property Owners Said After Their Siding Jobs
These comments come from callers across Horry County, used with permission and edited for length.
We are a good drive from town and figured nobody would come out for a few panels. The pro I was connected with lives about fifteen minutes away, came out the next day, and replaced the hail-cracked vinyl on our north wall.
Earl W.Horry County hail damage repairOur farmhouse clapboard was long overdue for attention. The pro replaced the rotted boards, back-primed each new one, and used stainless fasteners to stop staining. They spotted a missing kick-out flashing above the porch roof too.
Linda S.Horry County wood siding repairWind took a section of T1-11 off my shop. I called at 6 in the morning and had someone out before lunch to sheet it in temporarily, then they came back with new panels and painted them to match.
Brandon K.Horry County outbuilding sidingWe bought a house in a new subdivision and the fiber cement was already cracking at the corners. The contractor showed us the nails were overdriven and the gaps at the trim were wrong, then gave us a written report for the builder.
Priya and Sam N.Horry County fiber cement inspectionWind pulled vinyl off the gable of our church hall. The contractor scheduled around our services, brought a lift for the tall wall, and wrapped up in two days.
Pastor Jim D.Horry County commercial siding repairSmall town, small job, quick answer. Needed two damaged panels replaced after a ladder accident and the contractor matched the color perfectly by pulling a piece from behind the AC unit.
Rosa M.Horry County vinyl repairSiding Questions From Across Horry County
How fast can a Siding technician arrive in Horry County?
Response time depends on where you are in the county and how busy contractors are after a storm. Emergencies are prioritized, and many get a contractor that day or the next morning. Planned-work estimates are usually booked within a few days.
Do contractors travel to rural parts of Horry County?
Yes. That is one of the main reasons people call us. We look for independent pros already working near your address, so rural properties are not passed over. A few may add a travel fee for very remote sites, and they should mention it before the visit.
Do you provide upfront pricing?
Independent pros you speak with will give a written quote once they see the siding. That keeps the price tied to the actual damage instead of a guess. No work should begin until you sign off on the estimate.
What emergency services are available?
Emergency service covers sheeting over exposed walls after storms, fastening loose panels, dealing with tree or vehicle hits, and stopping interior leaks. Lasting repairs come after materials are matched.
Can you help with barns, shops, and outbuildings?
Yes. Many county calls involve metal, T1-11, board-and-batten, or vinyl on outbuildings. We send those to independent pros who handle farm and accessory buildings in addition to houses.
Is the call really free?
Yes, calling is free and there is no obligation. Dominguez Construction Siding is a referral service, so the contractor provides your quote directly.
Do I need a permit for siding in Horry County?
That depends on whether your property is in a town or unincorporated area, and how big the project is. Whole-house replacements are more likely to require one. Your contractor should check and handle it.
Will insurance cover storm damage to my siding?
Sudden wind and hail damage is often covered, but policies vary. Call your insurer first, then have the contractor document the damage with photos and a written description. Solid documentation helps the claim move faster.
What should I ask a contractor before hiring them?
Ask for a current insurance certificate, any license your town or county requires, a written scope that mentions flashing and house wrap, and who will handle permits. Also confirm they install to the manufacturer's instructions so your warranty holds.
How long does a siding repair usually take?
Small repairs often take a few hours once matching material is on hand. Bigger sections that need sheathing work can run a day or two, and full re-sides may take a week or longer. Weather and supply can shift the timing.
Where We Route Siding Calls in Horry County
Commercial buildings, rentals, churches, schools, and HOA properties in Horry County are covered as well. Managers and out-of-area owners are welcome to call for the property.
Every town, village, and unincorporated area in Horry County is covered. Whether you are in the county seat, a small crossroads community, or out on acreage, the dispatcher will look for an independent pro working near you.
The cities and zip codes listed below are part of the service area. If your town is not listed, call anyway, because coverage often reaches beyond the list.
- The county seat and nearby neighborhoods
- Small towns and villages
- Rural and unincorporated land
- New subdivisions and HOA communities
- Farm buildings and shops
- Commercial and multi-family properties
Siding Damage Anywhere in Horry County? Call Now
A live dispatcher answers 24/7. Free to call, no obligation, and you will be connected with a licensed and insured independent contractor near you.
Call +1-844-782-0929 Now