Storm Damage Siding Repair in Horry County County, SC
Storm damage, rotted boards, or a complete re-side? Call once and get connected with a licensed and insured independent siding contractor working across Horry County.
- Dispatch 24/7 across the county
- Free to call, no obligation
- Quotes in writing first
- Independent, licensed & insured pros
A live dispatcher picks up day or night. The call is free and you will be routed to a licensed, insured independent local contractor.
Tap to Call +1-844-782-0929Siding Help That Reaches Every Corner of Horry County
Dominguez Construction Siding is a free referral service that connects property owners across Horry County with independent local siding contractors. We do not install or repair siding ourselves. We answer the phone 24/7, learn what is going on with your walls, and route you to a licensed and insured independent pro who already works in your part of the county.
Covering a whole county is where a referral line really pays off. A contractor headquartered in the county seat might not travel far for a small repair, but a crew working the outlying towns could be minutes away. We match the job and the location so you are not left working through a phone list.
Properties in Horry County range widely. You will find older farmhouses with painted wood clapboard, small-town homes covered in aluminum, manufactured homes with vertical vinyl, and new construction in fiber cement or engineered lap. Barns, workshops, and outbuildings clad in metal or T1-11 panels are frequent calls as well.
Permit requirements can vary between incorporated towns and unincorporated areas. A good contractor will know which building office covers your address and will say early on if a permit applies.
On the call, share your address and the closest town, plus your siding type and whether water is getting inside. Rural addresses do not always map cleanly, so those details help us locate the independent contractor truly nearest to you in Horry County.
County properties also tend to have more outbuildings, longer driveways, and walls that face open fields, which means more wind exposure than a sheltered city lot. Contractors who work the area know to check fastening and wind ratings on those exposed elevations, and to plan for material delivery on gravel or soft ground.
Every Kind of Siding Job, One Phone Call
Nearly every siding call we route lands in one of six categories. Here is what each one involves, what a good contractor checks, and what you should expect before anyone hands you a number.
Emergency and Storm Damage Siding Response
When a wind event peels a run of vinyl off the gable or a falling limb punches through a wall, the clock starts. Exposed house wrap is only rated to sit uncovered for a limited window, and bare OSB sheathing starts drinking water the first time it rains. That is why storm calls get routed first.
The first visit is about stopping water, not selling a remodel. A competent pro will secure loose panels, tape or replace torn wrap, cover open sheathing with temporary sheeting, and photograph every elevation before anything is touched. Those pictures become important if an insurance claim follows.
When a limb is still resting against the house or the meter base took a hit, keep your distance and call the power company first. Siding pros can work near a service mast or meter, but they leave live electrical equipment to the utility. Once the area is safe, the pro can tarp, sheet, and secure the wall the same day in most cases.
- Short-term weather protection over torn wrap and open sheathing
- Re-securing vinyl panels that unlocked from the course below
- Hail strike mapping across vinyl, aluminum, and painted fiber cement
- Time-stamped photos ready for your insurance adjuster
Targeted Siding Repair: Cracks, Rot, Warps, and Gaps
Not every problem needs a full tear-off. A cracked vinyl panel from a stray baseball, a warped section next to the grill, or a single soft clapboard under a window can usually be fixed in a few hours. The craft is in the details, like popping vinyl free with a zip tool without creasing the rows above, tracking down a matching profile, and figuring out what caused the damage.
Rot is the one that fools people. Soft wood at the bottom of a window usually traces back to missing head flashing or a failed sill pan, not the siding itself. A contractor worth your time will probe the sheathing, check it with a moisture meter, and correct the water path before the wall gets closed.
Matching is the other half of a good repair. Vinyl lightens with sun exposure, so a fresh panel from the identical line can still stand out on a sunny wall. Experienced repair pros measure the exposure, profile, and butt height, bring a cut sample to the supply house, and when nothing matches, pull a panel from behind a shrub or deck where a slight mismatch will not show.
- Single-panel and partial-wall replacement
- Replacing rotted boards, trim, and sheathing
- Melted or heat-warped vinyl near grills and reflective windows
- Woodpecker damage, impact cracks, and critter entry gaps
Residential Siding Installation and Full Replacement
Re-siding a house is a major decision, and installation quality matters more than whatever logo is on the carton. Manufacturers tie their warranties to their published installation instructions, so a crew that skips steps can void coverage on day one.
On a correct replacement, the old siding is stripped to the sheathing so the wall can be checked. Damaged sheathing is cut out and replaced, the weather barrier is lapped shingle-fashion with taped seams, openings are flashed in sequence, and a level starter line is struck before course one. Corner posts, J-channel, and trim are set plumb so every course lines up with window heads instead of wandering.
Ask how the old siding will be removed and what happens to it. For houses built before 1978, disturbed painted wood or trim can contain lead, so contractors should use lead-safe practices like plastic containment, HEPA cleanup, and correct disposal. If the bid does not mention it and your house is that old, ask.
- Tear-off, disposal, and sheathing repair
- New weather barrier or rainscreen behind the cladding
- Insulated vinyl and rigid foam upgrades for energy savings
- Profile and color guidance, from Dutch lap to board-and-batten
Siding for Commercial, Rental, and Multi-Family Buildings
Apartment buildings, retail strips, offices, and HOA communities have different needs than a single home. Work has to happen around tenants and customers, scaffolding and lifts need to be staged safely, and the finished look has to match across dozens of units. Most property managers want a written scope, a phased timeline, and certificates of liability and workers comp before mobilization.
Callers in this category often need a contractor who can price both a single damaged building and a phased re-side of an entire complex. We connect them with independent commercial-capable pros who carry the equipment and insurance for that scale.
Commercial wall assemblies often carry extra requirements, from fire-rated sheathing on certain building types to specific fastener schedules in high-wind zones. A commercial-capable contractor will read the drawings or the existing assembly before quoting, rather than pricing it like a house.
- Phased re-siding for HOAs and apartment communities
- Cladding repairs for storefronts and office buildings
- Fire-rated and code-specific wall assemblies where needed
- Occupant-friendly scheduling and end-of-day cleanup
Specialty Materials: Fiber Cement, Wood, and Engineered Lap
Vinyl is the most common call, but plenty of homes are clad in something heavier. Fiber cement plank is dense, fire-resistant, and holds paint well, but it has to be cut with dust control because it contains crystalline silica, and it needs proper clearances above roofs and grade. Butt joints need flashing behind them, and nails go in flush, never overdriven.
Cedar and other natural wood siding look beautiful and last for decades when they are back-primed, fastened with stainless or hot-dipped galvanized nails, and installed over a drainage gap. Cheap nails cause the black streaking you see on neglected wood walls. Engineered wood lap splits the difference on cost and weight, as long as cut ends are sealed and the bottom course stays clear of soil and mulch.
Metal siding is coming back on modern farmhouse and contemporary designs, and older homes still carry plenty of original aluminum. Dented aluminum can often be replaced one piece at a time when the profile is still made, and steel lap or board-and-batten comes in baked finishes that resist fading. In both cases, the contractor should use compatible fasteners so the metal does not corrode.
- Fiber cement lap, panel, and shake work
- Cedar clapboard, shiplap, tongue-and-groove, and shake
- Engineered wood lap and trim systems
- Aluminum and steel siding repair on older homes
Inspections, Flashing, Soffit, Fascia, and Trim Work
Siding only performs as well as the details surrounding it. Most wall leaks we hear about begin at a missing kick-out flashing at a roof-to-wall joint, a split caulk line at a window, or a soffit that lets driven rain behind the cladding. They cost little to fix early and plenty to fix late.
Many callers simply want a set of trained eyes on the house before buying it, before a storm season, or after one. A typical siding inspection looks at fastening, clearances, flashing, sealant, hidden moisture, and how much life the material has left.
A proper inspection wraps up with photos and a written summary, not only a quick verbal take in the driveway. That write-up helps whether you are negotiating a purchase, budgeting for next year, or recording condition ahead of storm season.
- Kick-out, drip cap, and Z-flashing installs
- Vented and solid soffit replacement and fascia wraps
- Pre-purchase, post-storm, and routine inspections
- Moisture meter and infrared scans behind suspect walls
Why Siding Fails and What the Right Contractor Looks For
After years of routing siding calls in Horry County, the same few failures come up over and over. None of them are mysterious once you know where to look.
Vinyl that was nailed down hard. Vinyl moves a lot with temperature. It is supposed to hang loosely on nails centered in the nailing slots, with a small gap left at each end for expansion. Pin it tight and you get rippled, wavy panels the first warm afternoon.
Missing kick-out flashing. Where a roof edge dies into a sidewall, water runs down the step flashing and needs a small diverter to throw it into the gutter. Skip it and the water goes behind the cladding, and the sheathing under those corners can rot out in a few seasons.
Too close to the ground. Siding that touches soil, mulch, or a patio wicks moisture and invites insects. Manufacturers spell out clearances above grade and roof lines, and fiber cement is especially strict about them.
Sealant used where flashing belongs. Caulk is a backup seal, not a plan for handling water. When a leak returns after each fresh bead of caulk, a missing piece of flashing is nearly always the cause.
No weather barrier, or one installed backwards. House wrap has to be lapped like shingles, upper sheets over lower ones, so water running down the wall stays on the outside. Reverse laps and untaped tears funnel water straight into the sheathing, and we still see older homes with no barrier at all behind the siding.
Fasteners that rust or bleed. Plain steel nails rust, stain the face of wood siding, and lose holding power over time. Wood and fiber cement need hot-dipped galvanized or stainless fasteners, and coastal homes really should be on stainless.
Green streaks do not always mean rot. Green or black streaks on shaded walls are usually surface mildew or algae that a gentle wash with a siding-safe cleaner will remove. Rot is different: the material feels soft, sounds hollow, or crumbles when probed. A contractor can tell them apart quickly, which can save you from paying for an unnecessary repair.
A word on timing. Planned siding projects pile up in spring and fall, while storm season brings sudden waves of emergency calls. If the job is not urgent, getting an estimate a few weeks before those rushes usually opens up more dates.
Should You Repair or Replace Your Siding?
This is the question we hear most from Horry County homeowners, and the honest answer depends on how much of the wall is affected and why.
When a repair usually makes sense
The damage stays on one elevation or a handful of panels, the remaining siding is solid and well fastened, the sheathing is dry, and a decent match can be found. Storm blow-offs, impact cracks, grill melt, and isolated rot from a single missing flashing usually fall here.
When replacement starts to win
Multiple walls are cracked, faded, or brittle, panels keep releasing because the original job was poor, soft sheathing appears in several places, or the material is too old to match. Paying for repeated repairs on a failing wall often costs more over a few years than doing it once properly.
What affects what you will pay
Every estimate is built on a handful of variables. Material comes first, with vinyl usually lowest, engineered wood and fiber cement in the middle, and real wood and premium metal on the high end. After that comes the size and height of the walls, how many windows and corners need trim, whether old siding has to be removed and hauled off, and how much sheathing needs replacing once the wall is open.
Access plays a part as well. A three-story wall over a sloped yard needs staging or a lift, and that time shows up in the bid. Hidden rot is the unknown, so a careful contractor will tell you up front how surprise sheathing repairs will be billed.
From Your Call to a Finished Wall in Four Steps
We keep the process simple because nobody wants to chase contractors. One call puts your job in front of an independent local pro who handles siding in Horry County.
Call the Dispatch Line
Tell the dispatcher what you are seeing: missing panels, a soft spot, a leak inside, or a full re-side you are planning. Photos help if you have them. Calls are picked up around the clock.
Get Matched With a Local Pro
We route your call to an independent, licensed and insured siding contractor who works your area and handles your type of job. Emergency calls are flagged for the fastest available response.
Inspection and a Written Estimate
The contractor inspects the wall, checks for moisture behind the siding, and explains what failed and why. A written estimate comes before any work starts, so nothing catches you off guard.
Work Completed and Final Walkthrough
After you sign off, the job is completed to manufacturer specs, the mess is cleared, and you walk the result with the contractor. Ask for warranty paperwork and photos for your records.
Why Horry County homeowners Start With One Call to Us
Finding a siding contractor on your own usually means leaving voicemails, waiting days for callbacks, and comparing bids that do not describe the same job. We take that legwork off your plate.
Independent Pros Who Carry Licensing and Insurance
Calls go to independent local contractors who state they carry the licensing and insurance your area requires. Always ask to see the certificate before work starts; any reputable pro will show it.
Clear Written Quotes Before Work
The pros in our network quote in writing after they see the wall, not over the phone sight unseen. You know the scope, materials, and total before anyone pulls a panel.
Fast Local Dispatch
Because calls are matched to contractors who already work around Horry County, travel time stays short. Storm damage and active leaks get priority at any hour.
Free to Call, No Obligation
Calling the line costs nothing, and you are never obligated to hire anyone. If the estimate does not feel right, you are free to pass.
Each caller is treated the same way, whether the job is a single cracked panel or a whole building. Small repairs tend to be the toughest to schedule alone, and they make up a large share of the calls we route.
We also keep the conversation practical. If your problem sounds like a gutter, roofing, or window issue rather than siding, the dispatcher will tell you so instead of sending a siding crew out for nothing.
To be straight with you, we are a referral service and not the contractor. The pros you are connected with run independent businesses, so spend a minute confirming their license, insurance, and permits for the work.
Warning signs worth a phone call
- Panels that are wavy, bowed, or pulling away at the bottom edge
- Cracks, holes, or chips that show house wrap or wood underneath
- Soft, spongy, or crumbling spots near windows, doors, or the foundation
- Bubbling paint or water marks on the inside face of an outside wall
- Mold, mildew, or green growth that returns quickly after cleaning
- Rust runs under nails or dark streaks on wood boards
- Open gaps at corners, channels, or trim where light or bugs get through
- Heating and cooling bills creeping up with no other explanation
Any single item on this list could be small. Two or three together, especially near windows or rooflines, usually mean water is getting where it should not. That is the right time to have an independent pro take a closer look, before a small repair turns into a wall rebuild.
A quick look at the main siding materials
Vinyl
Popular for its affordable price and easy maintenance. Thicker panels resist wind and impact better, and insulated vinyl adds a foam backer for stiffness and comfort. It must be hung loose to move with temperature.
Fiber Cement
Heavy, fire-resistant, insect-proof, and great at holding paint. It needs dust-controlled cutting, flashing at butt joints, and strict clearances above grade and roofs.
Natural Wood
Classic looks and a long life when maintained. Boards should be back-primed, nailed with stainless or galvanized fasteners, and refinished on a regular cycle.
Engineered Wood
Lighter than fiber cement, with wood texture at a mid-range price. Cut edges must be sealed and the bottom course kept clear of soil, mulch, and standing water.
Follow-Up Notes From Horry County Callers
Shared with permission and trimmed for length, these notes come from callers spread across Horry County.
We are a good drive from town and figured nobody would come out for a few panels. The pro I was connected with lives about fifteen minutes away, came out the next day, and replaced the hail-cracked vinyl on our north wall.
Earl W.Horry County hail damage repairOur old farmhouse has wood clapboard that had not been painted in years. The contractor replaced the worst boards, back-primed every new piece, and used stainless nails so we would not get streaks. They also caught a missing kick-out flashing over the porch roof.
Linda S.Horry County wood siding repairHigh wind pulled a T1-11 panel off my workshop. I called at dawn and had help there before noon to cover it, and they returned with new panels painted to match.
Brandon K.Horry County outbuilding sidingWe bought a house in a new subdivision and the fiber cement was already cracking at the corners. The contractor showed us the nails were overdriven and the gaps at the trim were wrong, then gave us a written report for the builder.
Priya and Sam N.Horry County fiber cement inspectionOur church fellowship hall had vinyl peeling off the gable after a windstorm. The contractor worked around our events, used a lift for the high section, and finished in two days.
Pastor Jim D.Horry County commercial siding repairLittle town, little job, fast response. Two panels got dented by a ladder, and the contractor got an exact color match by taking a panel from behind the AC condenser.
Rosa M.Horry County vinyl repairStorm Damage Siding Repair Questions From Across Horry County
How fast can a Storm Damage Siding Repair technician arrive in Horry County?
Response time depends on where you are in the county and how busy contractors are after a storm. Emergencies are prioritized, and many get a contractor that day or the next morning. Estimates for planned work are usually set within a few days.
Do contractors travel to rural parts of Horry County?
Yes, and it is a big reason people use this line. We look for independent pros already working near your address, so rural properties are not passed over. Some may charge a trip fee for very remote locations, and they should tell you before they come out.
Do you provide upfront pricing?
Independent pros you speak with will give a written quote once they see the siding. That way the price reflects the real damage, not a guess. Nothing should start until you approve the quote.
What emergency services are available?
Emergency service covers sheeting over exposed walls after storms, fastening loose panels, dealing with tree or vehicle hits, and stopping interior leaks. Permanent repairs follow once materials are matched.
Can you help with barns, shops, and outbuildings?
Yes, a lot of county calls involve metal, T1-11, board-and-batten, or vinyl on outbuildings. We route those to independent pros who work on agricultural and accessory buildings as well as homes.
Is the call really free?
Yes, calling is free and there is no obligation. Dominguez Construction Siding is a referral service, so the contractor provides your quote directly.
Do I need a permit for siding in Horry County?
That depends on whether your property is in a town or unincorporated area, and how big the project is. Full replacements are more likely to need one. Your contractor should confirm and take care of it.
Will insurance cover storm damage to my siding?
Wind and hail damage is frequently covered, though every policy is different. Call your insurer first, then have the contractor document the damage with photos and a written description. Solid documentation helps the claim move faster.
What should I ask a contractor before hiring them?
Request an up-to-date insurance certificate, any license required where you live, a written scope listing flashing and house wrap, and who pulls the permit. Also confirm they install to the manufacturer's instructions so your warranty holds.
How long does a siding repair usually take?
Minor repairs usually take a few hours after matching material arrives. Bigger sections that need sheathing work can run a day or two, and full re-sides may take a week or longer. Weather and material availability can change the schedule.
Siding Coverage Across Horry County
Coverage includes commercial buildings, rental homes, churches, schools, and HOA communities in Horry County. Property managers and owners who live elsewhere can call on behalf of the property.
The line covers every town, village, and unincorporated area in Horry County. From the county seat to small rural communities and large acreage properties, the dispatcher will find an independent pro close to you.
The cities and zip codes below are all inside the coverage area. If your town is not listed, call anyway, because coverage often reaches beyond the list.
- The county seat and nearby neighborhoods
- Villages and small towns
- Unincorporated and rural properties
- HOA communities and new subdivisions
- Farms, barns, and outbuildings
- Commercial and multi-family properties
Get a Horry County Siding Pro on the Line
Call day or night. It costs nothing and connects you with a licensed, insured independent pro close to your property.
Call +1-844-782-0929 Now